QL Series DTH Button Bit

​DTH Bits are Mainly used for Quarrying, Ore Mining, Coal Mining, soft, medium hard, and hard rock, blast hole drilling and water well drilling project, Marble quarry or well drilling and other construction projects....

Send InquiryChat Now

GMD could supply lots of grades DTH Bits, they can be chosen according to different applications. Both soft, medium-hard, and hard rocks, Our DTH Bit could have a good performance.

 

The Advantage of Our DTH Button Bit

1. Smooth performance and long service life of DTH bits due to high quality alloy  steel materials and advanced processing technology adapted.

2. Low problem rate and easy to maintenance due to simple , reliable and easy  assemble and disassemble inner structure of DTH bits.

3. Interchangeable with DTH bit and dill pipe manufactured by Atlas copco and Ingersoll-rand.

 

Shank Type: QL40, QL50, QL60, QL80

Bit Diameter: 105mm-605mm

Bit Face: Flat Face, Convex Face, Concave Face, Drop Center, Double Gauge.

 

Details, kindly check below:

image002.jpg

image004.jpg

 

Shank TypeDiameter in mmFlushing Holes NO.Gauge ButtonsFace ButtonsApprox. Weight
QL 4010527*14mm6*13mm9.0 KGS
11027*14mm6*13mm9.2 KGS
11528*14mm7*13mm9.5 KGS
12028*16mm7*13mm10.3 KGS
12728*16mm7*13mm11.5 KGS
QL 5013528*16mm8*13mm15.5 KGS
14028*17mm7*14mm16.0 KGS
14628*18mm7*14mm16.8 KGS
15228*17mm8*14mm17.0 KGS
16528*18mm9*16mm18.0 KGS
QL 6015228*17mm8*14mm24.0 KGS
16528*18mm9*16mm25.0 KGS
17128*18mm10*16mm27.0 KGS
19039*18mm11*16mm29.0 KGS
20339*18mm12*16mm33.0 KGS
QL 8020329*18mm12*16mm35.0 KGS
216210*18mm17*18mm49.0 KGS
241210*18mm17*18mm64.0 KGS
254312*18mm19*18mm71.0 KGS
292312*18mm30*18mm85.0 KGS
305412*18mm30*18mm95.0 KGS


image006.jpg

 

How to Choose right DTH Button Bit?

image010.jpg

 

1. Flat Face Bit

This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash

2. Convex Face

For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.

3. Concave Face

The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.

4. Drop Center Bit

For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.

5. Double Gauge Face

This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.

 

Button Shape Selection

Button Shape

Application

image012.gif

Domed/Round Button: Domed/Round buttons are suitable for very abrasive and very hard formations.

image014.gif

Parabolic /Semi-Ballistic Button: Parabolic buttons are usually used as gauge buttons and front buttons, suitable for medium abrasive and hard formations.

image016.gif

Ballistic Button: Ballistic buttons are   usually used as front buttons, suitable for medium abrasive and medium hard   formations. They can also be used as gauge buttons if the rock is soft.

image018.gif

Sharp Buttons: Sharp buttons are usually   used as front buttons  for soft   formations, suitable for high rotation speed and low bit broken rate soft   rock.

 

Key Words:

DTH Bit

QL Series DTH Button Bit

DTH Bits for Hard Rock Drilling

High Air Pressure COP Series DTH Bits for Hard Rock Drilling

DHD Shank DTH Bit

dth drill bit

dth hammer bit 

DTH Button Bits

High Air Pressure DTH Button Bit

Large Diameter Button Bits

Down The Hole Drilling Tools

QL DTH Bit

 


Hot Tags: QL series DTH button bit, suppliers, manufacturers, factory, price
Related Products