Home > Knowledge > Content
Grinding assembly of the front cutting edge (front corner) of the bit grinding machine
Jun 28, 2018

Before grinding the cutting edge, the clamping head will be set into the static point grinding seat, gently push the bottom wheel, into the end, rotate to the right to the silent

Until then, return to the center, remove the steering 180°, and grind the other side to the silence in the same way.

※ when the front cutting edge is ground, the clamping head is fixed with a group to take and pay the action, and the position of the center is fixed by the clamping head with the corner line.

The positioning tip on the grinding seat.


Related Industry Knowledge